Double Glazing Window Locks Repairs
Repairing double glazing window locks is essential to keeping your home safe. A damaged hinge or handle could allow draughts into your property and leave your windows vulnerable to burglars.
Fortunately, you can fix stiff uPVC locks or handles without having to replace your window or door unit. Sometimes, cooling or lubricating the mechanism will solve any issues.
Broken Glass
Double glazing window locks may become worn out over time. If this happens, the handles could become difficult to open or even locked shut. This could cause problems with ventilation in the home and also pose an issue for security. It's important that you get the window repaired as soon as you can.
Double glazed windows consist of three or two glass panes with gas between them to provide insulation and an elastomer seal that holds the panes in place. Condensation between the glass panes can be an indication that there is an issue with one of the seals, which will need to be replaced. It is usually necessary to replace just one window pane and is much less expensive than replacing the entire window.
Condensation and cloudiness are usually caused by a blowing seal on a double-glazed window. This can be caused by many reasons, including air leaks or an excess amount of moisture in the house. If you spot the issue, it's crucial to contact a double glazing expert to repair the gas seal and seal in your double-glazed windows.
It is possible to replace a single pane of double glazing glass but it is not recommended to do this without the assistance of a professional. This is because it requires special tools and expertise to complete the task safely. You could damage the window frame, or your health if you try to do it yourself.
When a double-glazed window is stuck, many people use a crowbar in an attempt to open it. However, this usually results in the frame being damaged and scratched. A specialist in window repair will be able to remove the handle and open the window without causing further damage. They can also convert old window mechanisms to modern ones.
Window hinges are prone to becoming stiff and difficult to open after a while especially when they are located in an area that is noisy. To avoid this happening, it's a good idea to grease the hinges regularly with silicone spray. It is also essential to avoid shutting the window too tightly or closing it with the handles, as this can cause damage to the hinges and lock mechanism.
Broken Sash
This is a typical issue for older double glazing windows. If the upper sash has fallen out of its pocket, it may be difficult to secure it and open the window. This usually happens because the pins are disengaged or a balance shoe has been disconnected. Every sash is unique, so it's important to understand how yours is configured before you attempt to fix it.
This can be solved by removing the sash, and thoroughly cleaning it. This will also reveal if the sash is still in good alignment. If not, you'll have to add sash stops in order to help keep it in place. They can be bought on the internet or at many hardware stores. Once you've cleaned the sash, you can replace the beads that are parting, and lubricate the pulley axles with a Teflon or silicone spray. Label the weights prior to removing them so that you can put them back in them correctly.
Another issue that is frequently encountered is a damaged handle. It's difficult to tell if your window handle is damaged, but there are some indications. If the handle is stiff or clunky or isn't secure, it's probably damaged.
This could be due to the simple fact that it's not being used however it's also possible that the handle has cracked or even become detached. In certain cases, the handle may be internally broken and cannot be replaced. However, it's still worthwhile to attempt to fix the issue as soon as possible.
You may have to unscrew the hinges that connect the window sash to the frame in order to remove it. This can be a tricky task, so it's essential to have someone to hold the sash in place and ensure it is steady. After removing the hinges it is important to wash the space around them. Reattaching the hinges is also a good idea. You can test the handle and see if it works properly. If it's not, you should consider replacing it. This will ensure that your window is as secure as it can be.
Broken Handle
The window handle is a delicate part with intricate mechanisms, and it's not common for them to degrade or break in time. It is therefore essential that any broken handles are repaired as fast as you can to avoid inability to function and security issues.
It is, however, easy to change the window handle. The window handle can be replaced by anyone with a few DIY skills. Unlike the sash which is secured using multiple bolts, a window handle only requires two screws. It's important to test the handle after it's been installed to make sure that it functions properly. This includes locking the handle and looking for gaps that might allow drafts to enter your home or allow opportunistic burglars access.
The most frequent cause of a broken handle on a window is wear and tear from regular use. A damaged handle could also be caused by excessive force or stress. A window that is smashed or forced open can place additional strain on the handle, which can increase the chance of damage, so it's best to complete all handling operations slow and slowly.
Other causes for a damaged handle include inadequate maintenance, ageing or design issues. The handle may break quickly due to an absence of regular cleaning and oiling. This is usually caused by dirt or other debris that has accumulated over time. In addition, the handle can be damaged due to improper installation and alignment problems.
If the suggestions above don't work If the fixes mentioned above don't work, the Tasker must gain access to the lock and remove itself. This may involve removing the window frame or removing the plastic bead and frame (to give more space). A new lock can then be fitted which matches the shape of your existing uPVC handle. After that the new handle can be fixed and the process is completed. Tasker will give you an estimate of the cost of the repair if this is the situation.
A faulty Lock
When window locks get damaged, it's important to fix the issue as soon as possible. This is because a broken window could cause drafts and weaken security barriers, leaving the home vulnerable to burglary. Window lock repair is typically not a major task, however it is better to let an expert handle the issue before it becomes worse and costs more money in the end.
UPVC window locks come with two versions: espagnolette handles and the cockspur handles. The first makes use of a central rod that operates the locking cams, which are shaped like mushrooms, that secure into window frame keepers. The latter comes with the handle that is attached to a spindle, which protrudes into the rod to trigger the lock's cams that resemble mushrooms which are also referred to as locking mushrooms. The lock's latch then clips into a window frame's mortise catches.
Both kinds of UPVC window locks are prone to damage, particularly in older homes. This can happen if the sash is warped or misaligned. It can also come loose. In Double Glazing Window Repairs must be replaced to avoid draughts as well as loss of efficiency. Tasker can repair the broken lock for you, leaving you with the security of knowing that your windows are secure from burglars.
A Tasker will first examine the double glazing of your window to identify the issue. Once they have all the data they require, they'll make their tools ready and visit your home. They'll typically bring a Phillips head screwdriver and needle nose pliers. wood glue and fine-grit paper.
Tasker has to loosen the screws that hold both parts of the lock on the window frame, if the sash has been misaligned. The Tasker will then detach the latch and fill in the mounting holes (if applicable) with wood putty before sanding the area to ensure it is identical to the rest of the frame.
If the lock is rusted it will be cleaned with a wire brush or oil. The lock will then be lubricated using grease to ensure it works smoothly. They'll also inspect the condition of the latch before reinstalling it.
